Daily Code TalkIMC 910 Floor Furnaces: Placement and Below-Floor Review

A floor furnace is a plan, section and framing decision. Use this two-part guide to find the location and below-floor checks before equipment procurement or permit.

By Osmany Portal, PEFlorida PE 95945 · Principal, MasterBuild Consulting

Permit Proof Chain

01Code TriggerIdentify why the section applies.

02Sheet EvidenceShow the requirement where the reviewer needs it.

03Coordination OwnerTie the requirement to the responsible discipline or party.

04Field ProofConfirm the installed condition can be verified.

Start with placement

Part 1: IMC 910.1–910.3 covers the listed appliance, restricted egress locations, nearby walls and combustibles, thermostat relationship and structural opening.

Then check the section

Part 2: IMC 910.4 covers grade and water-entry clearance, any needed excavated pit, all-side separation and control-side service access.

One coordination pass

On a section, draw the selected unit, actual grade, pit, side envelope and control side. Compare that section with the architectural circulation plan and the structural framing before committing to the location.

Code basis

2024 IMC Sections 910 model-code education. Confirm the locally adopted edition and amendments, the selected product listing and manufacturer instructions, and the authority having jurisdiction. Read the ICC 2024 IMC Chapter 9 for the complete model-code provisions.

PE-led project support

Need this applied to a live project?

MasterBuild Consulting helps owners, architects, GCs, and project teams turn code questions into permit-ready MEP decisions before review comments, field changes, or inspection issues cost more time.

Get this applied to your project Send project background Join the free Code Desk email list

Daily Code Talk uses the 2024 IMC as model-code education. Verify adopted code, listings, manufacturer instructions, and AHJ path before project use.